Foam Concentrate SILVARA I without Fluorine (Class A, B)

Rating:

0/5 based on 0 reviews!

Quim-Foam Silvara I is a fluorine free and silicon free low viscosity Newtonian foam concentrate to extinguish hydrocarbon fuels fires and solids.

Quim-Foam Silvara I is formulated with solvents, hydrocarbon surfactants and additives. Silvara I does not contain any type of organohalogen compound, it is easily biodegradable and responsible with the environment

Stock status: on request

Please note: Due to rapid changes in raw material prices, the listed price is indicative and may change at the time of order. Contact us for an exact quote.

9.00 €

(Price per litre with VAT 21%)

Delivery cost estimate
Discount or individual wholesale price

*Product descriptions are based on manufacturer information. Descriptions and images are indicative and may change. Configuration or parameters may be adjusted according to manufacturer updates.

Description
Reviews

Technical documentation

Technical information

Quim-Foam Silvara I forms resistant foam to isolate the fuel from the oxygen and extinguish the fire. Fire performance of Silvara I is similar to fluorine foam concentrates in hydrocarbon fuels fires. It is an alternative to the use of AFFF products. It is suitable for use at 1% with fresh, sea or brackish water.

Application

Quim-Foam Silvara I should be used in fresh, sea or brackish water to extinguish class B fires (hydrocarbons fuels).

It is not suitable to use on polar solvent fuels.

It is useful to combat class A fires (solids) due to its excellent wetting properties. Silvara I has been designed to obtain its optimal potential when it is used with CAFS.

It can be used on low, medium, or high expansion.

Application of Silvara I by foam achieves both excellent extinguishing and reignition times in hydrocarbon fuel fires. Silvara I can be used with any device (aspirating or non-aspirating) in the same way and with the same application rate as an AFFF foam concentrate, due to its ability to form a high quality, compact, fluid and oleophobic foam.

As Silvara I does not contain any filmogen fluorosurfactant, it is impossible to get an aqueous film above the hydrocarbon. However, it is not necessary since even a thin layer of foam will be enough to seal the fuel and avoid evaporation and reignition.