Kit for Rooms up to 80 m³ — Aerosol Fire Suppression System AGS-11/6 and SEP-1a
A ready-made kit for automatic aerosol fire suppression in rooms with a volume of up to 80 m³. It includes two AGS-6 aerosol modules and a SEP1A automatic activation unit.
The system provides rapid automatic activation in the event of a fire and is suitable for protecting enclosed technical rooms, electrical equipment, control cabinets, server rooms, and other facilities without a permanent human presence.
The kit is designed to provide automatic fire suppression in rooms with a volume of up to 80 m³. It includes two AGS-6 aerosol modules and a SEP1A automatic activation unit.
Upon receiving a signal from the fire alarm and control system, the SEP1A unit activates the AGS-6 modules. The generators release a fire-extinguishing gas-aerosol mixture that is distributed throughout the protected volume and suppresses combustion.
The system does not use water, foam, or powder, so it can be used in rooms containing electronic and electrical equipment. The AGS-6 modules are designed for operation at temperatures from to, at humidity of up to 98% at, and under vibration loads of up to 1 g.
The kit is suitable for protecting:
electrical switchgear rooms and automation cabinets;
server rooms and telecommunications nodes;
technical and utility rooms;
rooms containing high-voltage equipment;
equipment in transport applications.
For effective operation, the system must be installed in a room with sufficient airtightness. Before installation, the module locations must be determined, connection to the fire alarm and control system must be provided, and the actual volume of the protected room must be verified for compliance with the design conditions.
Aiheeseen liittyvät tuotteet
Ostoskorisi
Alennus
Hyödyllistä tietoa
Hyvä asiakkaamme!
Varastosaldot ja hinnat ovat suuntaa-antavia ja voivat muuttua päivän aikana.
Pyydä tarkka tarjous ottamalla meihin yhteyttä
+371 27249249 tai sales@latakva.com
Suositut tuotteet
