Tecbor B 40 Tunnel Suspended Ceiling on Metal Structure. RWS 120 & RWS 180

Install the metal structure that will support the suspended ceiling forming a grid (refer to Technical Department for sizes) with primary profiles and secondary profiles sized 75 × 46 × 1.2 mm and 75 × 40 × 1.2 mm respectively.

Once the metal structure is in place, fix the Tecbor® B 40 mm board to it using 5.5 × 73 mm self-drilling screws.

Mercor Tecresa® offers different assembly options. Please contact the Technical Department.

SOLUTION 1

1. Tecbor® 40 mm boards
2. Expanding metal anchor with inner thread
3. Steel threaded rod Ø 12 mm
4. Zinc coated nut Ø 12 mm
5. 75 × 46 × 1, 2 mm metal profile
6. 75 × 40 × 1, 2 mm metal profile
7. 5, 5 × 73 mm screw
8. Plug anchoring + 10 × 100 mm screw
9. Tecsel® mastic for joints
10. Reinforced concrete slab

Install the metal structure that will support the suspended ceiling forming a grid (refer to Technical Department for sizes) with primary profiles and secondary profiles sized 75 × 46 × 1.2 mm and 75 × 40 × 1.2 mm respectively.

Once the metal structure is in place, fix the Tecbor® 40 mm board to it using 5.5 × 73 mm self-drilling screws.

Mercor tecresa® offers different assembly options. Please contact the Technical Department.

SOLUTION 2

1. Tecbor® 40 mm boards for tunnel
2. Expanding metal anchor with inner thread
3. Steel threaded rod Ø 12 mm
4. Zinc coated nut Ø 12 mm
5. 75 × 46 × 1, 2 mm metal profile
6. Tecbor® 12 mm boards
7. 6, 3 × 65 mm screw
8. 4, 5 × 50 mm Hi-Low screw
9. Tecsel® mastic for joints
10. Reinforced concrete slab

Install the metal structure that will support the suspended ceiling forming a grid (refer to Technical Department for sizes) using primary profiles 75 × 46 × 1.2 mm in size. The secondary profile is replaced with a strip of Tecbor® 12 mm board 150 mm wide.

Once the metal structure is in place, fix the Tecbor® 40 mm board to it using 6.3 × 65 mm self-drilling screws.

Mercor tecresa®, offers different assembly options. Please contact the Technical Department.

SOLUTION 3

1. Tecbor® 40 mm boards
2. Expanding metal anchor with inner thread Ø 12mm
3. Steel threaded rod Ø 12 mm
4. Zinc coated Ø 12 mm
5. Pivot TC-60 Steel grip, e= 0, 6 mm
6. TC-60 connection
7. 5 × 80 mm screw
8. Plug anchoring + 10 × 100 mm screw
9. Tecsel® mastic for joints
10. Concrete slab
11. TC 60/27 profile

Install the metal structure that will support the suspended ceiling forming a grid (refer to Technical Department for sizes) with a TC 60/27 profile. Once the metal structure is in place, fix the Tecbor® 40 mm board to it using 5.5 × 73 mm self-drilling screws.

Mercor tecresa®, offers different assembly options. Please contact the Technical Department.