Flame Cabel Coating I Paste (10 kg)

TECHNICAL DATA:

• Fire resistance class: up to EI 120
• Colour: Graphite grey
• Environmental class: Z1, Z2
• Density: 1, 42 ± 5% g/cm³
• non-volatile content, %: 73, 9 ± 5%
• Storage temperature range: from +5°C to +30°C
• Shelf life, to application with no limit: 10 months in originally sealed container
• The theoretical amount of paint needed (kg / m²) to give a coating thickness of 1 mm: 1, 89 kg/m²
• Commercial package: 10 kg

Paste designed for the fire protection of steel and iron pipes without insulation, passing through the partitions; fire-resistant ceilings or walls and also to seal combustible pipe with a small diameter up to 40mm.

• Technical Approval: AT-15-7807/2016
• Cert. of conformity: 1488-CPR-0581/W
• Hygienic certificate: HK/B/0557/01/2014
• declaration of conformity: CARBO/003-17-10-2016

APPLICATION:

The way of protecting metal pipes without insulation penetrating floor or wall (protection should be done on both sides).

• 
  Step 1: Fill the space between the pipe insulation and the partition tightly. Use mineral wool with a density of min. 60 kg/m³ or cement mortar.
• 
  Step 2: By using a brush, apply Flame Cabel Pasta I to the partition to form a ring with a minimum width of 50 mm and a minimum thickness of 0.6 mm.
• 
  Step 3: Apply Flame Cabel Pasta I to the pipe so that a ring is formed with a minimum width of 500 mm and a minimum thickness of 1.2 mm.
• 
  Step 4: Mark the penetration with the attached label, mark Flame Cabel Pasta I on it, enter the date and name.

Additional information:

Paint is ready to use, does not require dilution. If necessary, limit dilution with hot water not more than 5%. Used tools clean with water. Surface drying time: 0.5 h +/- 10% (20C temperature and relative humidity 65%).

• Application: Metal pipe (non-combustible), without insulation, Combustible pipe without insulation